Zonguldak OIZ · 2,000 m² plant
Home / Green transition

A green building starts with a sound frame.

A green building uses fewer resources over its whole life, from plot and energy to water and materials, and can be reused at the end. A steel frame is one of the soundest places to start.

GREEN FACTS

Recycling
Steel is remelted without losing its properties
Turkish steel
About 72% of 2025 crude steel from arc furnaces
YSEB
Required for new buildings of 2,000 m²+
CBAM
In its definitive phase since 2026
Dimensions of a green building

Twelve dimensions of a green building, and steel's share

A green building is not one product but a set of decisions that work together. A steel frame contributes directly to most of them.

  • Land use

    A light building needs a small foundation and disturbs the plot less.

    Steel helps
  • Energy efficiency

    Precise framing for insulated sandwich panels and facade systems.

    Steel helps
  • Renewable energy

    The roof is designed for the solar panel load from day one.

    Steel helps
  • Water efficiency

    A dry site: far less water for formwork, curing and washing.

    Steel helps
  • Material efficiency

    Sections are cut to size; offcuts go back into steelmaking.

    Steel helps
  • Waste management

    Shop fabrication, little rubble on site, material recovered after dismantling.

    Steel helps
  • Lower emissions

    Most Turkish steel is made from scrap in electric arc furnaces.

    Steel helps
  • Indoor environment

    Wide spans allow plans that bring in daylight and fresh air.

    Steel helps
  • Comfort

    Thermal, acoustic and visual comfort are designed with the facade and floors.

  • Design flexibility

    Column-free interiors let the building adapt to new uses years later.

    Steel helps
  • Resilience

    A ductile steel frame absorbs seismic energy, so the building lasts longer.

    Steel helps
  • Operation & maintenance

    Easy upkeep with anti-corrosion paint and accessible bolted joints.

    Steel helps
Life cycle

Steel across the building's life cycle

A green building is judged across every stage, from siting to the day it is taken down, not just its years in use.

1Siting2Design3Construction4Operation5Maintenance6Renovation & dismantlingSTEEL
  1. SitingA light steel building gets by with a smaller foundation, an advantage on weak soils and tight plots.
  2. DesignStructural design is done alongside fabrication; sections are optimised and no steel is wasted.
  3. ConstructionParts are prepared in the shop and bolted on site: a short, dry, quiet build.
  4. OperationA solar-ready roof and a frame for an insulated envelope cut energy use.
  5. MaintenanceRepainting and joint checks on a visible, accessible frame.
  6. Renovation & dismantlingBolts come out; the frame is re-erected elsewhere or goes back into steelmaking as scrap.
Why steel is green

Four reasons

It recycles

Steel can be melted down and made again without losing its properties. A building at the end of its life is raw material, not waste.

It is lighter

A lighter frame needs a smaller foundation, so less concrete and cement are used.

Dry site

Parts are prepared in the shop and bolted together on site, with far less formwork, water and rubble.

It can be rebuilt

Bolted joints come apart, so the frame can be reused in another building somewhere else.

The Turkish framework

The rules shaping green buildings

Regulations now require energy performance and renewables from new buildings, and carbon has become a cost line in exports.

nZEB

Nearly zero-energy buildings

Since 1 January 2025, new buildings of 2,000 m² or more need at least a class B energy certificate and at least 10% of their annual energy from renewables to get a building permit.

EPC

Energy performance certificate

Buildings are rated A to G. New buildings need at least class C for energy and greenhouse gases to get an occupancy permit.

YeS-TR

Turkish green building certificate

The national scheme set up by the Green Certificate Regulation for Buildings and Settlements, being rolled out in stages starting with public buildings.

CBAM

EU Carbon Border Adjustment Mechanism

Entered its definitive phase on 1 January 2026: embedded emissions in iron and steel sold into the EU now carry a cost, so low-emission steel gains value.

A summary for information as of November 2026. For the requirements that apply to your project, the current regulation and the owner's engineering office are authoritative.

Comparison

Concrete and steel, through a green lens

General tendencies; every project's result depends on its own calculation.

TopicReinforced concreteSteel frame
Building weightHeavyLighter
Foundation and concreteMoreLess
Water and formwork on siteHeavy useLittle; dry assembly
Build timeLonger; curing timeShorter; prepared in the shop
Later changesHard; needs demolitionEasier; bolted joints
After demolitionRubbleRecycled or reused material
Applications

What we do for the green transition

Steel buildings for urban renewal

A lighter, earthquake-resistant steel frame that rises quickly in place of the demolished building.

Residential · Apartments

Rooftop solar supports

Solar panel supports for warehouse, workshop and factory roofs, with the roof designed for the panel load. A direct contribution to the nZEB renewable requirement.

Solar · Warehouse · Workshop

Demountable structures

Bolted systems for temporary warehouses, site buildings and exhibition structures that can be taken down and re-erected elsewhere.

Bolted connections

Framing for an efficient envelope

Wall girts and roof purlins to carry sandwich panels and insulated facades, the route to a better energy class.

Facade · Roof

Green roof structure

Beams and decks designed for the soil and water load of a planted roof.

Roof · Load design

Supports for rainwater and services

Steel platforms and hangers for rainwater tanks, gutters and service runs.

Water efficiency
Sample application
kWhrooftop solar supports
Sample application

Solar-ready warehouse roof

Solar panel supports on a warehouse roof, with the roof designed for the panel load.

Green transition · Warehouse
+3,00+6,00+9,00+12,00+15,00
Sample application

Five-storey apartment block

An urban-renewal block on a braced steel frame with composite floors, lighter than the building it replaces.

Residential · Urban renewal

Items marked “Sample application” are illustrative drawings showing the kinds of structures we take on and what we fabricate for them; they are not completed client projects.

Send us your project, let's talk steel

Whether you have drawings, dimensions or just an idea, we will map out the structural system and fabrication for you.

Address
Orhanlar Mah. Yalı Cad. No: 25
67300 Kdz. Ereğli / Zonguldak, Türkiye